Company Introduction

Products

CS Center

Contact Us

DH-211 T.C.T. Saw BladeFor wood (TR type)
  • Use : The cut surface is excellent. It is possible to use wood effectively by powerful cutting. It is used for rip sawing of construction wood materials.
  • Machines : Table circular saw machine, gang rip saw machine
External diameter Blade number Thickness Internal diameter
7-1/4“ 184㎜ 60T 2.4T 19㎜
8“ 203㎜ 80T 2.4T 25.4㎜
100T
9“ 230㎜ 60T 2.4T 25.4㎜
80T
100T
10" 255㎜ 80T 2.4T 25.4㎜
100T
120T
12“ 305㎜ 80T 3.0T 25.4㎜
100T
120T
14" 355㎜ 60T 3.0T 25.4㎜
80T
100T
120T
  • Possible for customization about other sizes
DH-211 T.C.T. Saw BladeFor aluminum (A type)
  • Use : It is used to cut and process comparatively hard substances vertically and horizontally such as synthetic resins as well as aluminum or other nonferrous metals. And, it can be used if low noise and clean cut surface are wanted.
  • Machine : Table circular taw machine
External diameter Blade number Thickness Internal diameter
7-1/4“ 184㎜ 60T 2.4T 19㎜
8“ 203㎜ 80T 2.0T 25.4㎜
10" 255㎜ 100T 2.4T 25.4㎜
120T
12“ 305㎜ 100T 3.0T 25.4㎜
120T
14" 355㎜ 60T 3.0T 25.4㎜
80T
100T
120T
10" 255㎜ 100T 2.4T 25.4㎜
120T
12“ 305㎜ 100T 3.0T 25.4㎜
120T
16“ 405㎜ 60T 3.0T 25.4㎜
120T
  • Possible for customization about other sizes
DH-211 T.C.T. Saw BladeFor panel metal (AP type)
  • Use : for the work of sandwich panels
  • Machine : Table circular saw machine
External diameter Blade number Thickness Internal diameter
7-1/4“ 184㎜ 32T 2.4T 19㎜
9“ 230㎜ 36T 2.4T 25.4㎜
10“ 255㎜ 36T 2.4T 25.4㎜
14“ 355㎜ 80T 2.4T 25.4㎜
  • Possible for customization about other sizes
DH-211 T.C.T. Saw BladeFor metal (SM type)
  • Use : For steel and nonferrous metal
    - Car parts (factory of car parts)
    - Pipes (factory of mass cutting of pipes)
    - Use in cutting round bars and angles
External diameter Blade number Thickness Internal diameter
12“ 305㎜ 80T 2.4T 25.4㎜
14“ 355㎜ 80T 2.4T 25.4㎜
  • Possible for customization about other sizes